9 Best Jigsaw Blades Reviews and Buying Guide

This guide will help you find the best jigsaw blade for your money. It has reviews of the top-rated blades on the market, as well as buying advice on what to look for when purchasing one.

But before going through the list, first, you need to know some key points when purchasing.

1. Blade teeth count: Jigsaw blades have a variety of teeth which varies in numbers. If you are looking for a clean and accurate cutting blade then you should choose a higher number of teeth blades, like a 32-teeth jigsaw blade. But for normal cutting, a 20-teeth jigsaw blade will be all you need.
2. No. of Blades in a Pack: Jigsaw Blades often come in a combo pack including multiple jigsaw blades. Usually, a pack with more blades comes in a high value for money and are cheaper than less.
3. Construction Material and Durability: Always check the material it is made of. Usually, a carbide-tipped teeth blades offer more durability than normal blades.
4. Warranty: Lastly, you should not avoid warranty. Always choose the one with a longer warranty.

You’ll learn more about these at the bottom of this post, i.e. In Jigsaw Blades Buying Guide.

Best Jigsaw Blades

No products found.

What to Consider When Choosing the Best Jigsaw Blades

Jigsaw blade sets provide a lot of options for versatility and value, and they are very popular. However, the huge variety of alternatives, as well as the number of specialist blades that produce more efficient sawing for certain materials, may be perplexing.

To find the perfect blade set for your jigsaw and your project needs, you need to consider the following key point when purchasing.

It should be made of high-quality materials

Jigsaw blades are manufactured of 4 material types: high-carbon steel (HCS), high-speed steel (HSS), bi-metal (BiM), and carbide (tungsten carbide). All of them are for specific materials cutting and have specific strength.

High-Carbon Steel (HCS)

The blades made of HCS are for cutting soft and light materials like plastics, wood, and fabric. The blades made of HCS usually can’t stand for high-speed cutting and longer service time.

High-Speed Steel (HSS)

The HSS blades are made of strong steel and can stand for high-speed cutting, but are also easy to be broken. They are good in hard and moderately tough materials cutting.

Bi-Metal (BiM)

The BiM blades are made of two different materials with different hardness. They are strong enough to cut through wood, plastic, metal pipes, and some other tough materials as well.

Carbide (Tungsten Carbide)

The blades made of carbide are the strongest and longest service blades than other types. They are able to cut the hardest materials easily.

Blade Length and Thickness

The length and thickness of a jigsaw blade are very important as they determine the cutting depth, width, and shape. The longer your blade is, the more you can cut. However, the longer blades tend to bend and curve when cutting hard materials.

Bi-metal blades have a consistent thickness from top to bottom, while carbon steel blades are thicker at the tip of the blade than along the back edge. Carbide blades are more consistently thick from top to bottom. A thicker blade will last longer because it is less likely to bend or curve when cutting harder materials.

A thinner blade can cut more sharply than a thicker one when the options permit, although there is little variation in blade thickness. The thinner the blade, naturally, the greater its propensity to break and wear down.

The last consideration is the jigsaw itself. It’s vital to understand the tool’s specifications since not all tools can accommodate every conceivable blade length.

Choose the right Shank Type blade for your jigsaw

The shank is the end of the blade that fits into your jigsaw. Jigsaw blades come T-Shank and U-Shank style. The type of shank of the blade depends on the type of jigsaw you purchase.

Most jigsaws use T-Shank blades, while there are some older jigsaws that require U-Shank blades.

In most cases, T-shank blade jigsaws feature tool-free replacement mechanisms, so it’s a quick and simple procedure. This is by far the most common sort of blade in current use, and virtually all new jigsaws incorporate them.

Some jigsaws may even include a proprietary blade fitting, which makes them difficult to replace. Some Makita jigsaws, for example, had their own type of blades that were only available from the manufacturer. It’s possible to find these blades, but it will be difficult. So if your tool is ancient, buying a new one might be the better long-term option.

Blade Teeth per inch (TPI)

The sawing blade teeth per inch (TPI) is a way to measure how many cutting edges the blade has in every one inch of its length. Jigsaw blades range from 5 TPI to 32 TPI, and it’s important that you choose the appropriate option for your needs.

Shallower teeth can make a more accurate cut, but it’s also more likely to break from the lateral strain. On the other hand, higher TPI blades are stronger and leave a clean finish.

For cutting hard and dense materials, choose higher TPI blades, while for soft and fast cutting, use lower TIP blades.

Higher TPI blades will provide clean cutting but will be slow. While lower TPI blades will cut faster but with rough edges.

While some blades have no teeth at all, including the carbide versions as well. Those with knife-like wavy edges are meant to cut polystyrene, leather, and other textiles.

If you cut one material repeatedly, it’s worth finding blades that are specifically made for it. They will cut more swiftly and accurately than general-purpose alternatives.

Conclusion

The working of a Jigsaw depends heavily on the blade you use. For different materials, different blades are used. Without a proper blade, your work will look childish or even you’ll end up destroying your materials. So it is important to choose the right blade for each of your project types.

Last update on 2024-11-21 / Affiliate links / Images from Amazon Product Advertising API. Note: Jigsaw Expert may earn a commission when you buy through links on our site.